How to Remove Evenflo Car Seat Cover to Wash?

Written by

Bruce Sonnier


Marcus Dutton

how to remove evenflo car seat cover to wash

Having a dirty car seat can be a hassle. Not only does it look bad, but it can also pose health risks to anyone in your car, especially infants and young children.

Fortunately, most car seats in the market, including those from Evenflo, come with removable and washable covers that can be easily disinfected to keep them free of harmful germs and bacteria.

If you’re wondering how to remove Evenflo car seat cover to wash, we’ve got you covered with this practical step-by-step guide.

Ways to Remove Evenflo Car Seat Cover to Wash


Do note that there are various Evenflo car seat covers with varied attachments or straps and, therefore, different ways to take car seat covers off.

Let’s focus on the Evenflo Revolve 360 rotational all-in-one seat assembly.

Remember, the Evenflo Revolve 360 is a family of car seat variants in the popular Evenflo Revolve all-in-one convertible and rotational car seats, which include the Evenflo Revolve 360 Slim and Evenflor Revolve 360 Extend.

Note that the car seat cover removal and cleaning process applies to all Evenflo Revolve 360 series variants.

What to prepare:


  • Screwdriver (optional)
  • Gentle detergent
  • Warm water
  • Soft brush
  • Cleaning cloth or towel

Detailed steps to remove Evenflo car seat cover to wash: 

Here’s a step-by-step process for removing the seat cover of an Evenflo Revolve 360 car seat:

Step 1 – Release the Harness Straps:


Press and maintain pressure on the harness release button as you pull the Harness Straps outwards.

Step 2 – Detach the Elastic Straps from the Headrest:


Elevate the headrest and carefully unhook the elastic straps from around the headrest adjustment handle.

Step 3 – Remove the Headrest Pad:


Unhook the elastic straps from the vehicle belt guides, and slide the headrest padding up and over the headrest.

Step 4 – Extract the Harness Strap from the Headrest Pad:


Gently pull the harness strap through the opening in the headrest pad, and take off the headrest pad from the seat.

Step 5 – Lower the Headrest and Release the Plastic Tabs:


Decrease the height of the headrest. At the back of the car seat, gently pull down the fabric at the top to disengage the plastic tabs.

Step 6 – Disconnect Hooks from the Seat Shell:


Find the flap on the front side of the seat pad, positioned behind the headrest, and slide it down to detach the hooks from the shell.

Step 7 – Remove the Back Pad from the Seat Shell:


From the rear of the seat, lift and pull the back pad away from the rotation handles at the top of the Seat Shell.

Step 8 – Detach the Hook-and-Loop Connectors


Unfasten the hook-and-loop connectors located in the lower part of the back pad, and pull the back pad away from the top of the shell.

Step 9 – Free the Fabric Binding from the Booster Lap Belt Guides


Carefully remove the fabric binding that surrounds the Booster Lap Belt Guides.

Step 10 – Remove the Seat Pad:


Push the Buckle and harness adjustment strap through the slot in the seat. Now, you can remove the seat pad from the seat.

You can refer to this video for a visual instruction:

How to Wash the Evenflo Pivot Car Seat Cover


The Evenflo pivot infant car seat is a popular product within the Evenflo line of car seats, which has several features that sets it apart from other models such as the Evenflo Revolve 360.

Here’s a step-by-step guide to washing the Evenflo pivot car seat cover:

What to prepare:


  • Mild soap or detergent
  • Lukewarm water
  • Basin (if hand washing)
  • Brush with soft bristles (if necessary)

For machine washing:


Step 1: Remove the car seat from base or stroller and detach the harness straps or bands from the car seat. Unfasten any latches or straps that attach the car seat to your vehicle. This will allow you to easily access all parts of the car seat.

Take pictures of detached items so it would be easy to remember where it goes and appropriately placed.

Step 2: Check the manufacturer’s label to confirm the cover is machine washable.

Step 3: Remove the cover from the car seat and place it in the washing machine on a gentle or moderate cycle with cold water.

Step 4: Add a small amount of detergent, but avoid using strong chemicals such as bleach or fabric softeners.

Step 5: After completing the wash cycle, remove the cover from the washing machine and lay it flat or hang it to dry.

For hand washing:


Step 1: Remove the car seat from stroller or base and detach the harness straps from the car seat.

Step 2: Check the manufacturer’s label to confirm the cover is hand washable.

Step 3: Fill a basin with lukewarm water and add a small amount of detergent.

Step 4: Submerge the cover in the water and gently agitate it with your hands. If there are any stubborn stains, use a soft-bristled brush to scrub them. This method is also effective if you need to get the puke smell out.

Step 5: Rinse the cover thoroughly with clean water.

Step 6: Once the cover is clean, lay it flat to air dry.

Tips for Reattaching the Evenflo Car Seat Cover After Cleaning

  • Make sure the clean evenflo car seat is thoroughly dry. The car seat cover should be completely dry before you put Evenflo car seat straps back together to prevent mildew or mold growth, which can be dangerous health hazards.
  • Check interior parts for signs of damage, especially those hidden from plain sight, before putting back the car seat to avoid untoward accidents, such as malfunctioning movable parts.
  • Always keep the user manual and cleaning instructions If you’ve lost the physical copy, most manufacturers, including Evenflo, provide digital versions online.
  • Secure the car seat cover properly. Doing so ensures the car seats your baby snugly, safely, and comfortably.
  • If you notice any signs of wear and tear when cleaning the car seat cover, pay attention to them. Fraying, tears, or excessive wear can compromise the safety and comfort of the car seat. You may need to replace the cover, car seat canopy (when provided), or other parts if they’re showing signs of wear.
  • Once the cover is clean and dry, make sure you put the Evenflo infant car seat back together after washing It should fit snugly on the seat with no loose areas that could become a safety hazard.

Maintenance Tips


Here are some practical and actionable maintenance tips for the Evenflo Revolve 360 car seat covers that are often neglected:

  • Regular cleaning

Regular removal of car seat covers for cleaning to remove dirt, spills, and odors is essential. Vacuum the seat covers to remove crumbs and other debris. This can be done weekly or as needed.

  • Clean according to prescribed washing instructions

Always follow the manufacturer’s instructions when washing the car seat covers. The Evenflo Revolve 360’s seat pad is usually machine washable.

You can use gentle detergent and wash on a gentle cycle in cold water.

  • Proper drying

Never put the Evenflo toddler car seat cover in the dryer, as high heat can shrink or warp the cover. Instead, air dry the seat cover completely before reattaching it to the car seat.

  • Spot cleaning

If there’s a small stain, you might not need to wash the whole cover. Instead, use a mild soap and water solution to treat the dirty spots.

  • Regular inspection

Regularly inspect the car seat cover installation for signs of wear and tear. This includes fraying, tears, and stains that won’t come out.

  • Avoid food and drink

This might be challenging, especially on long trips, but try to minimize the amount of food and drink consumed in the car seat to avoid spills and stains.

  • Use a car seat protector

A car seat protector can help protect the car seat cover from spills and accidents, especially if your child is still in diapers or is potty training.



Can I use bleach to wash my Evenflo car seat cover?

Ideally, avoid using bleach because not only would it damage the Evenflo car seat cushion and fabric, but it can also be hazardous to infants and young children.

Use only a prescribed disinfectant to get vomit smell out of the cover.

How often should I wash my Evenflo car seat cover?

Under normal use, it is recommended to clean the car seat once a month, unless you need to clean puke or get poop out of the seat cover, which should be done immediately after it occurs.

How do I remove stains from my Evenflo car seat cover?

  1. If the stain is fresh on your Evenflo car seat cover, use a clean cloth or paper towel to blot and remove as much of the stain as possible. Be careful not to rub the stain in further.
  2. Use a gentle fabric cleaner or make a mild soap and warm water solution to clean the stained area. Apply the cleaner and rub the dirt with a soft cloth.
  3. For protein-based stains like milk or vomit, use an enzyme-based cleaner.
  4. After washing, allow the cover to air dry. Avoid using a hot air dryer, as the heat can cause the cover to shrink or warp.

Can a car seat cover expire?

When used accordingly, car seats would need replacement after 6 months of use as a standard expiration regulation for such products.

However, signs of wear and tear could also affect the longevity of the car seat product and shorten the span of time used.


Now that you know how to remove Evenflo car seat cover to wash, ensuring and keeping your cover clean and well-maintained is assured for your child’s safety and comfort during car rides.

With a little bit of effort and following the manufacturer’s instructions, you can easily remove, wash, and reassemble the car seat cover to keep it fresh and ready for your little one’s next adventure on the road.

5/5 - (2 votes)



"As the content writer of Charmcitycirculator, I intend to bring just the best purchase options and straightforward answers to your problems. Other than what we put up on our website, we hope to hear more from you. "

– Bruce Sonnier