When you’re a car owner with a child, your kid’s car seat becomes an additional concern. Like all parents, you may be trying to figure out car seat cleaning matters like how to clean messes, remove stains, get puke smell out, etc.
Worry not; let check out how to clean Nuna PIPA car seat here. This guide is important to make sure your child’s seat is clean and comfortable for your next family trip.
Table of Contents
Best Way to Clean Your Nuna PIPA Car Seat
Step 1: Remove the Nuna PIPA Car Seat From the Base
What you need to do first before Nuna car seat cleaning is to carefully remove the seat from the base.
- To do this, you need to press the release buttons on the car seat. These are located on the sides of the seat, with one button on each side.
- Fully push down both the release buttons. Then, lift the seat off the base.
Step 2: Remove the Nuna PIPA Car Seat Base From the Car.
If the car seat base is also dirty, then you should remove it from the car for cleaning.
- To do this, simultaneously push it down on one side with one hand, and with your index finger on the other hand, push the little button on that side. Then pull that side out.
- Do the same on the other side.
Step 3: Disassemble the Nuna PIPA Car Seat
You need to take apart all the different parts of the Nuna PIPA car seat to clean it thoroughly. Below are the steps for removing each part listed chronologically.
1. Remove the Canopy
- The canopy also has two release buttons for removal located on both of its sides. Press the release buttons down, and then pull out the canopy.
- Unfasten the velcros that secure the canopy at the back of the seat.
- At the edge of the plastic bar, there’s an elastic strap, which you can pull on to pull the bar out easily.
- You also have to ensure that the extension of the canopy stored within a zipper is removed for cleaning. So, get it out by unzipping the canopy and pulling it out
2. Remove the Infant Inserts
- To take the infant inserts out of the car seat, first remove the Nuna PIPA infant insert for the head. You just have to unfasten the velcro that secures it to the seat.
- Next, remove the lower infant insert for the body. You can take it out by unbuckling the harness and pulling it off the crotch buckle.
3. Remove the Harness and Buckle Covers
- The harness covers each have two snaps that secure them to the shoulder straps. Unfasten the snaps to remove the harness covers.
- To remove the buckle cover, pull out the ribbon in the buckle that keeps it in place and slide the cover off.
4. Remove the Car Seat Cover
- The car seat cover is secured to the shell by some plastic tabs, snaps, and hooks. Detach the tabs from the shell by pulling them downward, and simply unfasten the snaps and hooks.
- Then, by the lower part of the main cover, there’s a plate, where you’d have to pull the cover out of, starting from one corner.
- Pull the main cover off the crotch buckle.
- Flip the car seat and there you will see that a hook secures the harness. Unhook the harness from it.
- Turn the seat back around and you can take the harness out of the slots with a slight pull.
- Finally, remove the main cover from the harness and pull it out of the seat. When it comes to the shoulder buckles, you have to turn them sideways when pulling the main cover out.
Check out the video here to easily follow the steps:
Step 4: Vacuum the Crumbs and Debris Out of the Shell
If your child is at that age where they make a mess, it would be a good idea to clean off crumbs and debris with a portable vacuum cleaner.
1. Wipe Clean the Plastics, Vinyls, and Metals in the Car Seat and Base
You can use sponge or cloth dampened for cleaning stains off these plastics, vinyls, and metals
When it comes to the buckles, wipe their outer surface with a damp cloth. Just don’t lubricate and immerse them in water.
Let them air dry afterward.
2. Wash the Nuna PIPA Car Seat Inserts and Other Fabrics
The washing instructions state that the fabrics are machine washable, but you can also hand wash them. Or if there are tough stains on them, you can do a combination of hand washing and machine washing but don’t machine dry and iron them, as that can destroy the fabrics.
If you’re going to hand wash, scrub gently and avoid aggressive scrubbing not to damage the fibers. Also, avoid using bleach and other harsh chemicals and dry cleaning on the fabrics.
Hand washing
Use a detergent and water for hand washing. It would help to let the fabrics soak for 15 to 30 minutes for stain removal.
You can scrub off stains with a soft brush. Then gently scrub them off by hand. andrinse the fabrics clean.
Machine washing
For this method, make sure to set the washer on the delicate cycle to prevent the fabrics from stretching and getting damaged.
3. Wash the Seat Harness
Use mild soap, water, and a soft cloth to remove dirt on the harness. Don’t soak it, as soaking can degrade its safety function.
4. Air Dry the Fabrics and Harness
Let the fabrics and harness air dry under a shade. But don’t expose them to direct sunlight, as too much heat can damage them.
Conclusion
If you’ve never cleaned a car seat before, you don’t need to worry about how to clean Nuna PIPA car seat, as this article has provided step-by-step instructions for the Nuna PIPA car seat cleaning process.
Just properly follow these steps, and you’ll be able to achieve the desirable cleanliness without causing damage, which is important to maintain the seat’s appearance, comfort, reliability, and safety.
